Description
Please note our general information about the rental process.
The RadonTec product innovation: AlphaSniffer
With our AlphaSniffer you choose the fastest way to find radon entry points in your building. In a practical storage case, it is the companion for every building inspection. With the Radon Sniffer, radon entry paths can be located within seconds. This means that large-scale remediation can be avoided and replaced cost-effectively by targeted sealing measures.
The advantages at a glance:
- Quick localisation: radon entry paths can already be detected after approx. 15 - 30 seconds.
- Delivery of precise measured values: Accurate quantification of radon occurrence within 5 minutes. Follow-up products of radon are taken into account.
- Optimised housing: The housing is simply constructed, lightweight and compact. One-button start, equipped with an OLED display and rechargeable via Micro-USB.
- Wireless connection with your smartphone via Bluetooth Low Energy (BLE).
- Free app for Android and iOS systems: monitor real-time data directly during measurement.
Technical data
Indicated Usage | Radon remediation |
Detector | Silicon Photomultiplier (SiPM) technology |
Dimensions | 11.5 x 8.5 x 11 cm (4.5 x 3.33 x 4.33 inch) |
Weight | 510 gram (1.12 lbs) |
Display | 3.2cm x 1.8cm OLED |
Power Supply | 3.7V internal rechargeable 4,400mAh Li-Ion battery pack; 19 to 20 hours operation |
Charger | 5V, 400mA; 16 hours charge time |
Air Pump | Approximately 500 mL/min |
Sensitivity | Scintillation cell: 1 counts per minute (CPM) = 28 Bq/m3 (= 0.75 pCi/L) |
Lower Limit of Detection | 37 Bq/m3 (1 pCi/L) [Sniff mode running for 30 minutes] |
Response Time | 15 seconds |
Recovery Time | Recovers from high radon exposures to 5% peak value in 5 minutes |
Scintillation Cell Volume | 0.30 L |
Scope of delivery
- AlphaSniffer
- Air hose
- Inlet filter tube
- USB cable
- Wall charger
- Protective case with foam