VENTS TwinFresh Comfo Serie RB1

Item number: 0380812541

starting from 378,00 €

including 19% VAT. , no shipping costs

Version

There are variations of this item. Please select the variation you wish.


Available now!

Description

VENTS TwinFresh Comfo RB1 Serie


With the TwinFresh Comfo RB1-50 and TwinFresh Comfo RB1-85 from the manufacturer Vents, you get an efficient, reliable and energy-saving ventilation system that supplies you with fresh air around the clock.

The advantages at a glance:

  • Supply clean fresh air to the premises Remove stale extract air from the premises
  • Clean the air of dust and insects
  • Prevent penetration of excessive humidity and appearance of mould
  • Protect against outdoor noise
  • Recover heat and provide humidity balance inside
  • Reduce the heating costs in winter and air conditioning costs in summer
  • Low energy demand
  • Versions

    In our shop you can choose between the RB1-50 (capacity up to 50 m³/h) and the RB1-85 (capacity up to 85 m³/h) of the TwinFresh Comfo RB1 series.

    Control and operating modes

    TwinFresh Comfo ventilation systems are equipped with a remote control for user comfort and ease of operation. The manual switches for basic operation modes on the ventilator casing make the TwinFresh Comfo control still more convenient and practical. If several ventilators are integrated into a central remote controlled ventilation network the signal from the remote control is received by the first ventilator only.

    TwinFresh RB1 SchaltungTwinFresh Comfo RB1 Control

    The cycle of the ventilation system

    Energy is recovered due to reversing operation of the ventilator, which consists of two cycles:

    Cycle 1: Warm stale air is extracted from the room, then it passes through the ceramic energy accumulator and while flowing through it, heats and moistens the ceramic accumulator transferring up to 88 % of its thermal energy. In 70 seconds, as the ceramic heat exchanger gets heated, the ventilator switches to supply mode automatically.

    Cycle 2: Clean fresh air from outside passes through the ceramic energy accumulator, absorbs moisture and is heated up to the room temperature due to the accumulated heat. In 70 seconds, as temperature of the accumulator drops down, the fan switches to extract mode and the cycle is renewed.

    TwinFresh RB1 Zyklus

    The ventilator changes its operation mode between supply and extract ventilation every 70 seconds.

    Technical data

    Parameter

    TwinFresh Comfo RB1-50

    3 speed levels

    TwinFresh Comfo RB1-85

    3 speed levels

    Voltage (V)

    100-230

    100-230

    Current (A)

    0.024 / 0.026 / 0.039

     0,034 / 0,050 / 0,071

    Unit power (W)

    4.5 / 5 / 7

    4,74 / 6,56 / 9,65

    Frequency (Hz)

    50/60

    50/60

    Shutters

    auto

    auto

    Functions

    Filter replacement indication, Timer, Humidity sensor

    Filter replacement indication, Timer, Humidity sensor

    Fernbedienung

    -

    -

    Luftkanalgröße (mm)

    150

    150

    Schutzart

    IP 24

    IP 24

    Suitable up to room size50 m²50 m²

     

    An example of the ventilation system based on TwinFresh:


    • To arrange a ventilation system based on TwinFresh ventilators, install one ventilator in each room.
    • For larger premises, install two or more ventilators.
    • It is advisable to use paired units to ensure balanced ventilation.
    • While integrating many ventilators into a single network one part of them must be set into air supply mode and the other part must be set into air extract mode.
    • TwinFresh ventilators are also suitable for use as single units.
    • Operation mode of each ventilator installed in a separate room is individually adjustable.
    • Air flows from one room to another through door grilles, openings or halls and provides that way required circulation in a premise.
    • An energy regeneration ventilation system based on the TwinFresh ventilators is designed to save operating costs for heating and air conditioning.

    Twin Fresh RB1 Anwendung Beispiel

    TwinFresh Ventilator design

    Ventilation unit

    The TwinFresh Comfo RB1-50 unit is equipped with a decorative front panel internally lined up with an insulation layer for extra sound attenuation and condensation prevention.

    Air filters

    • Two built-in filters with total filter class G3 are used to clean supply and extract air flows.
    • The filters ensure fresh air cleaning of dust and insects and prevent the ventilator parts from soiling.
    • The filters have antibacterial treatment.
    • The filters are cleaned either with a vacuum cleaner or flushed with water with no harm to the antibacterial treatment.
    • F8 filter is available as an option.

    Ceramic energy accumulator (regenerator)

    • The high-tech ceramic energy accumulator with regeneration efficiency up to 88 % is used for extract air heat energy recovery and supply air heating.
    • Due to its cellular structure, the unique energy accumulator has larger air contact area and excellent heat conducting and accumulating properties.
    • The ceramic energy accumulator has a special anti-bacterial treatment to prevent bacteria generation inside of the regenerator.
    • The antibacterial treatment is rated for 10 years operation.
    • The outer side of the regenerator is lined up with a heat insulating material.

    Reversible DC fan

    • Air is supplied or extracted by a reversible axial fan with DC motor with safe voltage 12 V.
    • Due to DC technology the fan is distinguished with low energy demand.
    • The motor has overheating protection and ball bearings for longer service life.

    Outer ventilation hood

    • The specially designed outer hood enables removal of extract air flow and condensate that is generated inside of the outer hood from the building wall.
    • Besides, the outer hood prevents ingress of water and foreign objects in the ventilator.
    • The outer hood is internally covered with insulating material that absorbs street noise penetration into the room through the ventilator and prevents condensate generation in the outer hood.
    • The EH 150 outer hood is made of polymer coated aluminium.
    • The EH-2 150 outer hood for thin walls is made of polymer coated stainless steel. 
    • Due to its labyrinth structure of the outer hood air flow changes its direction several times and the ventilator is protected against direct wind impact.

    Mounting plate

    • The TwinFresh Comfo series models are equipped with a mounting plate which facilitates servicing of the fans, filters and the regenerator.
    • The ventilation unit is fixed to the mounting plate with special magnets and contact sockets.
    • The ventilator inner parts are accessible by pulling the ventilation unit by hand.

    Telescopic air duct

    • Round air ducts are made of PVC plastic. 
    • The telescope length is adjustable to the wall thickness which makes mounting quick and easy.
  • Ratings

    Average product review

    Write your first review and help others with their purchase decision:

    Question on item

    Contact
    Question on item