AlphaSniffer for the detection of radon entry paths

More than 20,000 satisfied customers

(5 Reviews)

2.795,00 €

incl. 19% VAT ,

Localisation of radon entry points
Fast detection: approx. 15 - 30 sec
Powerful battery: 19 - 20 h operating time
Large OLED display: 3.2 cm x 1.8 cm
In a robust protective case

Available immediately
Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

Professional device for the detection of radon entry paths: AlphaSniffer

With the AlphaSniffer you choose the fastest way to find radon entry points in the building and to test and confirm the success of remediation measures. It is therefore an indispensable tool for any of your projects aimed at radon reduction.

The AlphaSniffer is lightweight, robust and versatile. It has a large OLED display for a user-friendly reading and a one-button control that makes it very easy to use. It connects to the smartphone wirelessly via Bluetooth Low Energy, allowing users to monitor and control real-time data via the "Radon Sniffer" app available on both Android and iOS systems.

The advantages at a glance

Fast localisation: Radon entry paths can be detected after only approx. 15 - 30 seconds.
Delivery of accurate readings: Accurate quantification of radon occurrence within 5 minutes. Follow-up products of radon are taken into account.
Optimised housing: The housing is simply constructed, lightweight and compact. One-button start, equipped with an OLED display and rechargeable via Micro-USB.
Wireless connection with your smartphone: Can be connected to your smartphone via Bluetooth Low Energy (BLE).

AlphaSniffer during radon remediation

In a robust storage case, it is the reliable companion of every radon expert during building diagnoses.

Prior to remediation work, use the AlphaSniffer to locate the entry points through which radon can enter the building. This allows you to ideally determine the scope of the necessary work. Due to the fast reaction time of 15 seconds, you can detect the radon entry points almost instantly.

After completion of the remediation work, check very promptly whether the measures were successful. To do this, use your AlphaSniffer to check all locations where radon concentrations were previously high. You can check the general indoor air with a simple 30-minute test.

Technical data of the AlphaSniffer

Use: Radon detection
Detector: Silicon Photomultiplier (SiPM) Technology
DSilicon Photomultiplier (SiPM) TechnologySilicon Photomultiplier (SiPM) TechnologySilicon Photomultiplier (SiPM) TechnologyDimensions: 11.5 x 8.5 x 11 cm (4.5 x 3.33 x 4.33 inches)
Weight: 510 grams (1.12 lbs)510 grams (1.12 lbs)
Display: 3.2cm x 1.8cm OLED
Power supply: 3.7V internal rechargeable 4,400mAh Li-Ion battery pack; 19 to 20 hours operating time
Recharger: 5V, 400mA; 16 hours charging time
Air pump: approx. 500 mL/min
Sensitivity: Scintillation cell: 1 count per minute (CPM) = 28 Bq/m3 (= 0.75 pCi/L)
Lower detection limit: 37 Bq/m3 (1 pCi/L) [If the unit runs in sniff mode for 30 minutes].
Response time: 15 sec
Recovery time: Recovers from high radon uptake with up to 5% peaks in 5 min.
Volume scintillation cell: 0.30 l

App Download

Playstore for Android
AppStore for iOS

Scope of delivery

1. alphaSniffer with:

Air tube: Connects filter and desiccant and scintillation cell together. Only use the black air hose supplied with the AlphaSniffer. The coiled tubing connects the desiccant tube to the "inlet" side of the scintillation cell.
Inlet filter tube (in the plastic tube): Air should flow through this tube before it enters the scintillation cell. A filter then removes radon progeny and other particles from the air so that radon levels can be accurately calculated. The inlet filter also removes excess moisture from the air, ensuring that the radon progeny in the cell is evenly removed from the plate.
USB cable: For charging the AlphaSniffer's internal batteries.
Wall charger: The charger should be plugged into a standard 230 V socket.

2. protective case with foam to give the Radon sniffer the best possible protection.

Average item rating

All reviews:

Entries 1 – 3 of 5

so findet man seine Radon Eintrittspfade
ideales Gerät zum finden der Radoneintrittspfade in Gebäuden vor allem im Keller

Martin W , 16.09.2022

super Gerät
wir haben bei uns im Haus vor allem im Keller ein erheblichen Radoneintritt, dies wissen wir schon länger (haben mit zwei Radoneyes gemessen).
Leider war es uns bisher nicht möglich die Eintrittsorte zu lokalisieren. Mit diesem Sniffer ging das problemlos und an den Eintrittsstellen hatten wir über 20.000Bq/m³!
Wir haben jetzt diese Radon Eintrittsstellen gefunden und abgedichtet, dadurch sank die Radonkonzentration in unserem Haus und vor allem im Keller von über ~800Bq/m³ auf unter 200Bq/m³ und das nur durch die Abdichtung von 5 verschiedenen Eintrittsstellen.
Dieses Gerät ist für die effektive Radonsanierung aus meiner Sicht Pflicht!

Reimund W , 15.02.2022