Electrosmog
measure electrosmog: with electromagnetic instruments of...
Electric smog reduce - with demand switches from radonshop.com...
Plastic case 33 x 27 x 16 cm for all HF- and LF-devices. 2 devices fits in the case!
Plastic case 33 x 27 x 8 cm for HF32D, HF35C, HFW35C and all LF-devices. To our HF-devices, an additional LF-device fits in the case!
This is the device for technical amateurs - especially easy to operate. It allows a straight forward assessment of the exposure, a determination of suitable remedial actions, as well as a control of their effectiveness.
Frequency: 16 Hz - 2 KHz (compensated, better than -2 dB)
Gigahertz-Solution NA5 Demand Switch
TOPSELLER: Gigahertz-Solution NA7 Demand Switch
Disconnects voltage directly in the fuse box as long as no electricity is needed.
- All the advantages of the NA series are combined
- Additional set screws and supply of more direct current
- Break the mains voltage already in the fuse box when no current is required
- The decoupleable apparent power can be up to 100 Watt
- Monitoring voltage of only 230 millivolts - the lowest value on the market
- Perfect for roller shutter controls that could not be decoupled with previous demand switch
- Suitable for HFE35C, HFW35C, HFE59B und HFW59D
- Applicable for the range of 27 MHz to 10 GHz
Electrosmog