Active Radon Detectors
The RTM 2200 Soil Gas from SARAD is a high-precision radon and thoron measurement system that has been specially developed for the fast and reliable in-situ measurement of radon in soil.
- Integrated determination of soil permeability
- Automatic protection against water ingress during measurement
- Built-in GPS receiver for easy mapping of the measuring points
- Rugged, splash-proof housing (IP67) for field use
- Fulfils the requirements of EN ISO 11665-11 for radon soil gas measurements
Manufacturer according to GPSR
Sarad
The RTM 1688-2 from SARAD is a versatile radon and thoron monitor that covers the entire spectrum of radon measurement and is suitable for use indoors, outdoors and in mines.
- Measuring range: 0 - 10,000,000 Bq/m³
- Real-time measurement with fast response time
- Integrated pump for soil air and water sampling
- High sensitivity due to optimised high-voltage measuring chamber
- Operation via mains adapter or internal rechargeable battery with up to 14 days runtime
Manufacturer according to GPSR
Sarad
Der Radon Scout PLUS wurde speziell für Langzeitmessungen in radonbelasteten Objekten entwickelt.
Manufacturer according to GPSR
Sarad
The AlphaSniffer from RadonTec is a professional device for the rapid detection of radon ingress paths in buildings.
- Localisation of radon entry points
- Quick detection: approx. 15 - 30 seconds
- Powerful rechargeable battery: 19 - 20 hours operating time
- Large OLED display: 3.2 cm x 1.8 cm
- Supplied in a robust protective case
Manufacturer according to GPSR
RadonTec GmbH
- Version
The Radon Scout Professional from SARAD is a highly sensitive radon measuring device that is suitable for both short and long-term measurements indoors.
- Measuring range: 0 - 1,000,000 Bq/m³
- Integrated sensors for temperature and humidity
- Optional CO₂ or pressure sensor available
- Battery and mains operation possible
- Professional ‘Radon Vision’ analysis software included
Manufacturer according to GPSR
Sarad
- Version
The Smart Radon Sensor from SARAD is a highly accurate electronic instrument designed for continuous monitoring of Radon activity concentrations in various environments.
- Very high sensitivity
- Immune to environmental influences
- Versatile interfaces
- Battery operated
- DAkkS accredited calibration
Manufacturer according to GPSR
Sarad
The AlphaE from Bertin is a compact, professional hand-held device for fast and time-resolved radon monitoring in buildings, outdoors and in mines.
- Measuring range: 20 Bq/m³ to 10,000,000 Bq/m³
- Light and small, ideal for personal radon exposure measurements
- Battery-powered with a battery life of up to 6 months
- Stores measurement data for up to 6 months at 1-hour measurement intervals
- Fast and accurate measurements, 80% of the final value after 2 hours
Manufacturer according to GPSR
Bertin
The Airthings Corentium Pro is a professional, portable radon meter designed for accurate and reliable indoor radon measurements.
- NRPP certification for building services and professional radon applications
- Bluetooth connectivity with iOS and Android app
- Stores up to 5 years of data at 1-hour resolution
- Lightweight and portable design
- Sensors for radon, temperature, humidity, atmospheric pressure and inclination
Manufacturer according to GPSR
Airthings
- Variation
- Programming Adapter
The AlphaTracer Industry is a patented real-time radon sensor specially developed for use in demanding environments such as waterworks, tunnels, mines and industrial plants.
- Measuring range: 0 - 1,000,000 Bq/m³
- High sensitivity: 17 cph @ 100 Bq/m³
- Splash-proof housing (IP54)
- M12 connector for robust connections
- Various interface options: Serial 12V & PWM (0-10V), Modbus 485, Modbus TCP/IP, WiFi
Manufacturer according to GPSR
RadonTec GmbH
- Variation
- Programming-Set
The AlphaTracer Office is an innovative radon sensor that enables real-time measurements of indoor radon concentrations and is particularly suitable for use in office buildings.
- Measuring range: 0 - 1,000,000 Bq/m³
- High sensitivity: 17 cph @ 100 Bq/m³
- Real-time radon measurement with 10-minute intervals
- Robust design, insensitive to environmental influences
- Various interface options: Serial 12V & PWM (0-10V), Modbus 485, Modbus TCP/IP, WiFi
Manufacturer according to GPSR
RadonTec GmbH
- Version
The Radon Scout Home from SARAD is a reliable device for long-term monitoring of indoor radon concentrations, ideal for homeowners, tenants and landlords.
- Measures radon, temperature and humidity
- Time-resolved measurement with data recording
- USB interface for easy data transfer
- Optionally available with CO₂ or pressure sensor
- Incl. professional analysis software ‘Radon Vision’
Manufacturer according to GPSR
Sarad
The RadonEye RD200 has been our bestseller for many years - a high-precision radon measuring device for private use that enables the fastest and most reliable measurements of indoor radon concentrations.
- Fastest measurement
- Highest accuracy
- Real-time monitoring
- Smartphone connectivity
- Easy handling
Manufacturer according to GPSR
FTLab
The EcoQube is a highly sensitive radon meter with Wi-Fi connectivity and smartphone app that enables precise and continuous monitoring of indoor radon concentrations.
- First result within minutes
- Precise radon monitoring for your home
- WLAN connection required
- Cube-shaped compact design
- Smartphone app for easy operation
Manufacturer according to GPSR
Ecosense
Corentium Home 2 is the latest generation of Airthings’ trusted radon detector—now with Bluetooth and built-in temperature and humidity sensors. Battery powered, easy to set up, and clear to read on the LCD and in the app for confident, long- and short-term radon assessment at home.
- Quick setup; first average shown after 24 h
- LCD with 24 h, 7-day, 30-day & long-term averages
- Bluetooth connection to the free Airthings app
- Extra sensors: temperature & relative humidity
- Up to 3 years battery life (2×AA)
Manufacturer according to GPSR
Airthings
- Color
The EcoBlu is a compact radon measuring device that impresses with its fast and precise measurement of indoor radon concentrations.
- Quick and accurate measurement
- Easy operation
- Large digital display
- Without WiFi or Bluetooth
- Compact design
Manufacturer according to GPSR
Ecosense
Receive personalized advice from certified radon experts and tailored solutions for your radon issue.
- Review of your previous measurements
- Personal 1:1 consultation with experts
- Detailed analysis of your building plans, photos, and videos
- Specific recommendations for radon reduction
- Flexible online meeting
Manufacturer according to GPSR
RadonTec GmbH
The Corentium Home from Airthings is a user-friendly, battery-operated radon meter for domestic use that enables quick and precise measurements of the radon concentration indoors.
- Measuring range: 0 - 9999 Bq/m³
- Display of daily, weekly and annual average values
- High-quality LCD display
- Insensitive to sources of interference
- Simple operation
Manufacturer according to GPSR
Airthings
The AlphaGUARD from Bertin Technologies is a highly accurate and portable radon monitor that is ideal for professional radon monitoring and measurement.
- Detector: 0.62l impulse ionisation chamber
- Measuring range: 2 - 2,000,000 Bq/m³
- Long-term stable calibration factor (guaranteed for 5 years)
- Easy data analysis with DataVIEW software
- Portable design and easy to transport
Manufacturer according to GPSR
Bertin
AlphaS is a versatile, field-ready radon monitor for fast, reliable measurements in homes, workplaces and harsh environments. Its pulse ionization chamber delivers high sensitivity and stability; the sniffing mode helps pinpoint entry points. LAN/WiFi plus an integrated web server enable remote data access and configuration.
- Measuring range: 2–200,000 Bq/m³ (0.027 pCi/L to 5.4 nCi/L)
- Technology: 0.2-L pulse ionization chamber, 1 cpm @ 60 Bq/m³
- Modes: diffusion & flow; sniffing for entry-point tracing
- Connectivity: LAN, WiFi, built-in web server; smartphone/tablet access
- Extra sensors: temperature, pressure, humidity (incl. Reloc, QA); up to 2.5-day autonomy; rugged PeliCase (<5.7 kg)
Manufacturer according to GPSR
Bertin
EcoQube Flex™ is a portable, battery-powered continuous radon monitor for home use, delivering fast, accurate results on the device and in the Ecosense app. Get your first reading in 10 minutes, a reliable measurement in 1 hour, and track radon room-by-room with clear graphs and long-term trends.
- First reading in 10 minutes (no 24-hour wait)
- 15× higher sensitivity than the industry minimum requirement
- Always-On display with real-time + highest/lowest values
- Bluetooth Low Energy + app graphs, insights & trends
- 2×AA batteries – up to 7 years offline operation
Manufacturer according to GPSR
Ecosense
Active Radon Monitors: Digital radon testing with trends, export, app, Wi-Fi & Bluetooth
If you want to measure radon clearly, continuously, and with time-resolved data, an active radon monitor is the right choice. Active devices run on electricity (plug-in or battery), show readings on a display or in an app, and allow you to track radon levels over hours, days, and weeks—often with data export for documentation and deeper analysis. (radonshop.com)
Because radon levels fluctuate significantly (weather, ventilation, pressure differences), active monitoring gives you the real advantage: you can see when levels rise, which rooms are affected, and whether actions (ventilation, sealing, mitigation) actually work.
Who should use an active radon monitor?
Active radon detectors are especially useful for:
-
Homeowners & tenants who want quick clarity and plan to test multiple rooms
-
Families monitoring living and sleeping areas
-
Property buyers looking for practical insight before purchasing
-
Landlords & facility managers who need traceable documentation
-
Schools, kindergartens, public buildings where transparency matters
-
Building biologists, inspectors & engineers who rely on exports and professional evaluation (radonshop.com)
Our bestseller: RadonEye (RD200) – fast, accurate, user-friendly
The RadonEye RD200 is one of the most popular choices for residential radon monitoring. It delivers fast indications, is excellent for room-to-room testing, and is easy to use via smartphone app. (radonshop.com)
Why customers love it:
-
quick first insight while still suitable for longer monitoring
-
app-based history and trends
-
widely used, proven device with strong real-world track record (radonshop.com)
(Important: Even if a device provides quick readings, meaningful decisions usually require several days or weeks of data due to radon variability.) (radonshop.com)
What you’ll find in this category
RadonShop.com intentionally offers a broad range—from easy home monitors to professional instrumentation. (radonshop.com)
1) Home monitors (simple, digital, fast)
Great for apartments/houses, basements, living rooms—often with display and/or app connectivity. Examples listed in this category include RadonEye, Airthings Corentium Home / Home 2, Ecosense EcoQube / EcoBlu. (radonshop.com)
2) Monitoring & trend-focused devices (export & long-term tracking)
Ideal if you want to log, compare and document (after mitigation, with ventilation systems, or across multiple rooms/buildings). Many devices support app/software analysis and exports. (radonshop.com)
3) Professional radon instruments (inspection, building biology, engineering)
For advanced requirements, detailed datasets, and specialized applications—e.g., solutions by SARAD and Bertin among others listed in the category. (radonshop.com)
Why “time-resolved” measurement matters
Radon is rarely stable. Active monitoring typically provides:
-
current readings (depending on device, shorter intervals)
-
averages (e.g., 24h, 7-day, long-term since reset)
-
peak / maximum indications (device-dependent)
This helps you identify patterns such as:
-
“levels rise at night / when windows stay closed”
-
“basement is high, ground floor is fine”
-
“after sealing, the baseline drops measurably”
-
“certain weather conditions push radon indoors”
That transparency is the key advantage over passive testing. (radonshop.com)
Data export, app, Wi-Fi, Bluetooth — what do you actually need?
Common buyer question: “Which features matter most?”
-
On-device display: best for quick checks without a phone
-
App connection (Bluetooth/Wi-Fi): great for trends and convenience
-
Export (CSV/software): essential for documentation (reports, compliance, mitigation verification) (radonshop.com)
If your goal is “just check if radon is an issue,” a solid home monitor may be enough. If you want to prove, compare, and document, export and software features are a must.
FAQ — quick answers
How fast do I get first results?
Many active devices provide quick indications, but reliable conclusions should use several days/weeks of data. (radonshop.com)
Where should I place the device?
Use the most occupied rooms, especially near ground level. Avoid drafts, windows, and strong heat sources. For source-finding: compare rooms under similar conditions. (radonshop.com)
How many monitors do I need?
Often one device is enough if you test rooms sequentially. For permanent monitoring in multiple locations (e.g., basement + bedroom), two devices can make sense.
Can I rent instead of buying?
Yes—RadonShop also offers a radon monitor rental option. (radonshop.com)
