Electrosmog
5 Hz - 100 KHz. Switchable, internal frequeny filter: 16.6 Hz bandpass, 50 Hz highpass, 2 kHz highpass for identification and evaluation of sources of pollution.
This device represents the low-cost access to the professional low-frequency measurement technology. Its functions and features are tailored to the needs and practical experiences of the building biology.
5 Hz - 100 KHz. Switchable, internal frequeny filter: 16.6 Hz bandpass, 50 Hz highpass, 2 kHz highpass for identification and evaluation of sources of pollution.
The NFA30M is the lowest priced meter of this series, but also a "real NFA" allowing a three-dimensional magnetic field measurement.
Frequenzbereich: 16 Hz to 32 KHz (compensated)
It is especially popular among medics and alternative practitioners, as it offers a perfect combination of easy handling and professional measurement possibilities.
Frequenzbereich: 800 MHz - 2.7 GHz (3.3 GHz with increased tolerance)
The "common advantages" are fulfilled by this instrument for the specified frequency range. Its functions and features are tailored to the needs and practical experiences of the building biology. Due to its comparably low price, it is often also used by computer retailers, authorities and industry for dimensioning of WLAN-networks.
Frequenzbereich: 2.4 - 6.0 GHz
- Suitable for HFE35C, HFW35C, HFE59B und HFW59D
- Applicable for the range of 27 MHz to 10 GHz
- Low-frequency electrical & magnetic fields (LF) from 16 Hz to 3 kHz
- New: 3D-measuring of electric and magnetic fields (otherwise only available in very expensive devices)
Safe and Sound Pro II RF Meter
5G Ready! - Low And Mid Bands - Third Party Tested
The Safe and Sound Pro II RF Meter is a professional RF meter that is designed to measure ambient radio frequency / microwave signals, and has a built in antenna.
- -
NEW Safe And Sound Classic II
Detects and measures 5G in the high mmWave band, 20 GHz to 40 GHz
- North America’s first-ever, consumer-level, high-band millimeter wave meter
- Professionally accurate and affordable – at a fraction of the cost of current high-band detectors
- The perfect companion to Safe and Sound Pro II RF Meter, it’s the missing link to revealing the full range of 5G frequencies
- Digital display in micro watts/m² and V/m, includes audio, peak and average readings with maximum peak hold
This is the device for technical amateurs - especially easy to operate. It allows a straight forward assessment of the exposure, a determination of suitable remedial actions, as well as a control of their effectiveness.
Frequency: 16 Hz - 2 KHz (compensated, better than -2 dB)
- Frequency range: 16 Hz - 100 kHz
- Electric field strength 1 - 1999 V/m
- Magnetic flux density 1 - 1999 nT
- Measurement accuracy: +/- 2 % deviation
- Application examples: Traction current, power lines, induction stoves, power supplies, consumer electronics
This is the device for technical amateurs - especially easy to operate. It allows a straight forward assessment of the exposure, a determination of suitable remedial actions, as well as a control of their effectiveness.
Frequenzbereich: 800 MHz - 2.7 GHz
This is THE device for technical amateurs - especially easy to operate. It supports all above mentioned "common advantages" and it allows a straight forward assessment of the exposure, a determination of suitable remedial actions, as well as a control of their effectiveness.
Frequenzbereich: 800 MHz - 2.7 GHz
This device supports all above mentioned "common advantages". It is especially popular among medics and alternative practitioners, as it offers a perfect combination of easy handling and professional measurement possibilities.
Frequenzbereich: 5 Hz - 100 KHz (compensated, better than -2 dB).
Gigahertz-Solution NA5 Demand Switch
TOPSELLER: Gigahertz-Solution NA7 Demand Switch
Disconnects voltage directly in the fuse box as long as no electricity is needed.
- All the advantages of the NA series are combined
- Additional set screws and supply of more direct current
- Break the mains voltage already in the fuse box when no current is required
- The decoupleable apparent power can be up to 100 Watt
- Monitoring voltage of only 230 millivolts - the lowest value on the market
- Perfect for roller shutter controls that could not be decoupled with previous demand switch
Electrosmog